1992 Oldsmobile Cutlass Supreme "cause car keep noise put" Questions

...car IF OIL AND FILTER BEEN CHANGED.LIFTERS NOISE CAN BE CAUSED BY DIRT IN DIRTY OIL GET IN LIFTER ORIFICE HOLES STOP HOLES UP ENOUGH TO KEEP LIFTERS FROM PUMP OIL CAUSING THEM TO MAKE TICKING NOISE, ...

...keep in gear makes a loud clicking noise and vehicle won't move , when I put it back in park the clicking noise stops . If your transmission is making a clicking noise when in gear and is not moving, ...

...car and they keep going out - the last one was just put in today and my car is making a very loud noise when I drive - what would be causing the wheel bearings to go out so fast? What is the torque ...

...car parts store. You put it into the reservoir on top of the power steering pump. If it keeps leaking out, causing a whining noise when you turn, then you have a leak which must be remedied. Hoses, ...

...noise when the clutch is put in You may have a bad throwout bearing which is not good as the transmission will need to be pulled to replace it, If replacing the throwout bearing it is usually a good ...

...cause flywheel noise on 2004 chevy trailblazer? when the car is running it makes a clicking noise from flywheel area the faster the idle the faster it gets when you put it in gear it quiets and when ...

...noise I having a envoy what i chages brakes pads couple times in a couple months ago started do it noises bad again When you step on the brakes, the pads vibrate. It may be you didn't put the little ...

...start it I have to rev it up to keep it running and it makes a bogging noise in the motor and puts also the exhaust is black and smells like gas what would cause this? sounds like its the timing is ...

cause this? Could something be stuck in there? Thanks most likely there is a mouse in the blower motor or a nest very common you would have to remove that. if that is the case i suggest putting bounce

noise like the fan is hitting something,and i have to keep my foot on the gas to keep it runing.............or it will go dead. Your description indicates you put the clutch plate in back to front and