1992 Oldsmobile Cutlass Ciera "signal lights" Questions

Signal lights do not work. I have a 92 oldsmobile cutlass and my signal lights do not work. I have changed the light baulbs and checked the fuse box. They still do not work. Also the signal light on ...

...lights and third brake light won't work, and running light and turn signal works. Would it be the pedal switch. I heard the the brake light goes through the turn signal, what should I look for? THE ...

signal lights are not working, replaced and fixed fuses.. was told the remote starter may have wiring problems affecting the signal lights.. hazard lights work maybe replace the turn signal flasher,it

Both turn signals light, but do not blink Where is the turn signal flasher located for a 1993 Olds Cutlass Supreme S ?Both turn signals do not work.I've changed all bulbs, Checked, changed fuses.turn ...

Passenger side turn signal doesn't work. Drivers side id o.k.. Lights and fuses are good. Light comes on but no blinking. You turn signal activator up under the dash is malfunctioning. Needs replacing

...signal(turn) lights blink very slowly when turn signal is engaged. All lights, front, rear and corner are burning. All lights blink normally when the hazard fl All lights blink normally when hazard ...

...signal is turned on the light on the dash lights up, but does not flash. Is there any relay and if so where is it located turn it on and look at your lights on the outside of the car. one should be ...

...signal flasher for 1994 olds cutlass ciera s, the four lights work and the headlights but not the turning signals This switch is mounted in you steering column where the signal stalk meets the ...

93 Oldsmobile Cutlass My brother inlaw has a 93 Cutlass and when he turns his left turn signal on the brake light in the rear window flashes also. His right brake light works ok. Also when his turn ...

turn signals dont work turn signals don't work, dash board does not indicate turn signal. hazards work. For 1993 Oldsmobile Cutlass Ciera 3.3L FI OHV 6cyl. you have two flasher units, one for Hazard ...