Question about Oldsmobile Cutlass Ciera
...replace the multi function switch 1993 Olds Cutlass Supreme S Both Turn signals light, but do not blink Fuses are good Bulbs all good Turn Signal flasher replaced None of these fixes have worked ...
Turn signals will not work. Replace the hazard switch first because the turn signals power runs thru it first.Then if it still does'nt work replace signal switch.
...turn signal it just stays solid.? most likely one of the bulb ons left side is burned out. Replace the burned out bulb and it should flash. you have a wire touching , a bad multifunction switch ,,, ...
turn signal lights dont work Turn signal switch needs to be replaced.
turn signal cancelling cam assembly, apply grease for lubrication. Replace the shaft lock and install a new shaft lock retaining ring. Use tool J-23653?SIR or equivalent to push down on the shaft lock
1994 olds custlass supreme brake lights are out fuse is good put new brake light switch in still out park and turn works but no brake light all bulbs good Replace the turn signal switch.
...turn signal switch the lite stays on, I have to use it manually. ** 4-Way flashers works o.k. ** Replaced flasher under dash. ** Checked fuses and there o.k. ThanX - Tonester Beware...some GM cars , ...
turn signal/wiper lever broke of in column how do I remove broken piece of lever to replace. sorry to say this you will have to take the steering wheel off to get to the turn singnal switch. caution ...
...turn signal/cruise/wiper replacement hello, hope this helps ya out... 1. remove th steering wheel retaining nut and remove the steering wheel. 2. remove lock plate cover with a couple of screwdrivers ...
...turn the car off, how hard is it to replace a keyswitch in a 94 olds cutlass sierra its not easy, there is a screw located under the steering wheel which has to be pulled and everything removed, the ...
650 questions posted
Usually answered in minutes!
575 Questions
540 Questions
476 Questions
412 Questions
332 Questions