1992 Oldsmobile Bravada "connect fuel injector wires 1985" Questions

...fuel injector, if this all checks out, then you can also use a mechanics stethoscope , and place the probe onto each fuel injector with the wiring connected, and then crank the engine, to see if you ...

...fuel can lead to injector issues. Throttle Position Sensor (TPS) Issues: Problems with the TPS can affect the air-fuel mixture and injector performance. To diagnose and resolve this issue, you may ...

...connect it to the injector wires. You can have fuel pressure, but if the injectors do not open, it will not get fuel. Test with starting fluid to see if fuel is the problem. If you have spark and no ...

1985 starting problems- Ignition switch , fuse box , battery were all replaced last week. Ignition switch was replaced more than once, mechanic thinks the first replacement was faulty. Also reported a

...Fuel Pump Circuit Low Voltage.  Code #55: Defective ECM.  Code #62: Engine Oil Temperature Sensor Circuit High. Please remember that if you have the computer key installed in the alcl and ...

fuel pump what would make it do this i can straight wire it to the battery and it will spray someone told me it could be the computer Using a test light, and with the ignition key in the "On" or "Run"

...fuel pump inertia switch (Sedan: the switch is on the trunk hinge - Station wagon: the switch is at the rear of the vehicle in the passenger compartment). 2.Set a voltmeter, Rotunda Number 014-00407, ...

...FUEL INJECTORS WONT OPEN ON 1985 NISSAN 300ZX On a 280 ZX, one side of the injector elecrtical feed is hot all the time. Pull an injector lead off. Usially #6 is the easiest one to get to. Get a test ...

connect the wire connector from the ignition module and if battery voltage is not present at the connector to the ignition module with the key in the "Run" position but it is present at the "Pos" side

...1985 chevy celeberty wagon . test fuel pressure. it doesnt have a carb As Steve said you need the fuel pressure checked . The cooling fan can be the coolant sensor, relay, fuse, wiring, connection or ...