Question about Oldsmobile Cutlass Supreme
ignition module but the problem still exist. the local auto shop can't figure it out I am having a similar problem, but there is no check engine light. It seems that mine dies at the light or running,
...test the ignition module for you. Be sure to clean the mounting surface inside of the distributor for the new module, and be sure to completely cover the bottom mating surface of the new ignition ...
Question about Oldsmobile Cutlass Supreme
...test it,when the ignition module does this,it will check good,until it is heated up,with the run mode setting on the tester,so have them do this when they test it,but,it is most likely the problem,if ...
Question about Oldsmobile Cutlass Supreme
...ignition module or pick -up coil inside the dist. is bad , video on youtube for testing . What size engine . Go to this web site ,click on ford ,pick the engine that yours has ,find ignition system ...
ignition rotor, distributor cap, and all 6 spark plugs. EGR valves move freely. fuel pressure diaphram does not appear to leak. do a vacuum test on the FPR if it IS holding vacuum, then i would try to
sensor or an ignition control module, remove the ignition control module and take it to an autopart store like a napa auto parts, there it can be tested, if that tests good then check the crank sensor
...module pack or the crank sensor or the cam sensor.i beleive the packs are under the ignition coils.you can take out the ignition module and run it up to autozone for a free test. hope this helps ...
Question about Ford Cars & Trucks
...module ? Or the ignition control module ? Learning how to test electronic system an not replacing parts is the way to find the problem . ScannerDanner gets his but kicked by an 88 150 EEC IV ...
...ignition module inside of the distributor, and you can remove the ignition module and have it tested for free at most auto part stores. If you do purchase a new ignition module be sure that it does ...
Question about Oldsmobile Cutlass Supreme
...ignition module? Waiting several hours for everything to cool down, may have helped. Did you have the ignition module tested? If you do a reset, a few minutes should be plenty. This may be related to ...
283 questions posted
Usually answered in minutes!
697 Questions
571 Questions
488 Questions
387 Questions
236 Questions