1991 Oldsmobile Custom Cruiser "oil pressur switch" Questions

Ad

...oil pressure switch. we haven't seen anything that looks like the pics of replacements shown. we are trying to locate the oil pressure switch. we haven't seen anything that looks like the ...

Ad

...switch: The oil pressure switch is usually located near the oil filter or on the engine block, close to the oil pressure gauge sender. Check for oil leaks: Look for any visible oil leaks around the ...

Ad

Question about Oldsmobile Custom Cruiser

2 Answers

...oil pressure switch connector. If the oil warning lamp goes out: Remove the oil pressure switch. Connect an oil pressure gauge in its place. Start the engine. If the pressure reading is 4.0 PSI or ...

Question about Oldsmobile Custom Cruiser

1 Answer

...oil pressure switch-3.3L and 3.8L engines Fig. 2: Location of the oil pressure switch-3.0L engine Fig.: Oil pressure switch (sending unit) schematic The low oil pressure warning lamp will illuminate ...

Question about Oldsmobile Custom Cruiser

2 Answers

oil level switch activates the OIL light in the instrument cluster when the oil level in the pan goes below a certain level. The switch is mounted on the oil pan. Hope this helped (remember rated this

Question about Cars & Trucks

1 Answer

...oil pressure switch Thread the new switch into the block by hand and then tighten the switch securely with the the oil pressure switch socket. Connect the electrical wire to the new oil pressure ...

...switch. The oil pressure switch will have a wire leading from the electrical connector to the switch itself. Once you have located the oil pressure switch, you can replace it if it is faulty or ...

...switch, low oil level or there's a need for an oil change as the old oil is no longer up to the job. Oil pressure switches are easily changed. The important thing is that you aren't getting a warning ...

Question about Cars & Trucks

2 Answers

...Oil pressure switch code. Majority of the time it is the oil pressure switch going bad. If you have the v6 3.1 or 3.4 it is located on the front of the engine right above the starter. DTC P1189 ...

Question about Oldsmobile Custom Cruiser

1 Answer

...oil switch is normally closed, and grounds the reference voltage from the Engine Control Module (ECM) on the Blue/Black (BLU/BLK) wire. If the code sets at idle - 2500 RPM - and the Brown/Yellow wire ...

Not finding what you are looking for?
1991 Oldsmobile Custom Cruiser Logo

48 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...