1990 Oldsmobile Cutlass Ciera "pvc valve" Questions

Ad

Question about Oldsmobile Cutlass Ciera

2 Answers

...is to take vapors created internally and re circ into motor to basically be burned off . So either on one or two valve covers or attached to air cleaner somewhere. PVC VALVE WILL BE ON VALVE

Ad

Question about Oldsmobile Cutlass Ciera

1 Answer

pvc valvue location For 1994 Oldsmobile Cutlass Ciera 3.1L SFI OHV 6cyl the PCV Valve is located: Under hood, center, upper engine area, mounted in rear valve cover Hope helps (remember to rated this ...

Ad

Question about Oldsmobile Cutlass Ciera

2 Answers

...is not safe to operate. Best guess sight unseen. 1. Vacuum line is off or vacuum leak, Faulty PVC Valve. 2. Return spring is weak or missing. 3. Frayed throttle cable. Hope this tip helps r/ ...

Question about Oldsmobile Cutlass Ciera

1 Answer

were is the pvc valve located Go to auto part store look at the part ,then go to the tunnel ram on your car it should be a threaded looking tube with rubber hose coming out of it DR.Raymilyea

Question about Oldsmobile Cutlass Ciera

2 Answers

pvc vaule on a 1992 oldsmobile cutlass ciera v6 3300 liter? I believe it's in one of the Valve covers. Has a rubber hose attached and should just pull right out. It is under the altenator on the block

Question about Oldsmobile Cutlass Ciera

1 Answer

...pvc valve, ignition coil.) Now it will not get a spark i have replaced the coil twice and check the plugs. Still no start. have you unplugged a connector somewhere ,possible without knowing it ,like ...

Question about Oldsmobile Cutlass Ciera

1 Answer

...GET TOO HOT SHUT OFF.CHECK PVC VALVE AND EGR VALVE MAKE SURE THEY ARE NOT STUCK OPEN OR DISCONNECTED.AND MAKE SURE IDLE SPEED IS NOT TOO LOW YOU IDLE SPEED IS ON THE FACTORY STICKER UNDER THE

Question about Oldsmobile Cutlass Ciera

1 Answer

...pvc valve issue? REMOVE PVC VALVE WITH VACUUM HOSE STILL ATTACHED CHECK FOR VACUUM AT PVC VALVE PLACING FINGER OVER IT.IF NO VACUUM FROM PVC VALVE BUT THE HOSE TO PVC VALVE HAS VACUUM REPLACE PVC ...

Question about Dodge Cars & Trucks

1 Answer

...PVC valve. It is typically located on the engine, near the throttle body or intake manifold. Disconnect the battery. This is important to ensure safety while working on the vehicle. Remove the PVC ...

Question about Oldsmobile Cutlass Ciera

1 Answer

pvc valve will be located on the valve cover. Or better yet will be inserted into the valve cover. Follow the hoses coming from your air cleaner ( air filter) to the one that goes to your valve cover.

Not finding what you are looking for?
1990 Oldsmobile Cutlass Ciera Logo

327 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...