2004 Mazda MPV "tighten down cylinder head" Questions

Ad

...tighten the valve spring down to remove the old valve, then install the new one, put the head back on, reattach exhaust manifold, put the valve cover back on (might as well replace head and ...

Ad

...threaded ends of frozen studs holding the cylinder head. As the bolts are tightened down onto the studs the cylinder head is gradually lifted upward free from the studs. Thanks for contacting ...

Ad

...down next tighten down using the correct tightening sequence so that the gasket is evenly compressed tighten down to the correct tension or degrees of turn as is stated in the specifications any ...

...TIGHTEN SEQUENCE - standing at front of car bolts down left side are 8/4/1/5/9 bolts down right side are 7/3/2/6/10. left side meaning distributor side. A four cylinder engine has ten (10) bolts. A ...

...100 ft LBS #5 BOLT 8 TO 10 AT 110 FT LBS . HEAD TIGHTEN SEQUENCE - standing at front ofcar bolts down left side are 8/4/1/5/9 bolts down right side are 7/3/2/6/10. left side meaning distributor

Question about Mazda MPV

1 Answer

...for f 150 4.6 liter engine cylinder head bolts can u help me pleas tighten All bolts down to 30ft-lbs. Then tighten them All down another quarter turn. Then tighten them all down another quarter

...down. Remove those alignment dowels. Then put bolts 8 and 10 in place. After the head of the bolt is cut off, you saw a slot in the top of the bolt. Helps when you remove it. (Have any old bolts that ...

Question about Mazda MPV

2 Answers

...down onto the block, aligning it correctly. Apply clean engine oil to the bolt threads and the contact face of the bolt head. Install the head bolts finger-tight. On all models except 1988-89 DOHC ...

...cylinder head bolt torque method used, it is imperative that the bolt threads be inspected for necking (stretching) prior to installation. If the threads are necked down, the bolt should be replaced. ...

...a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good

Not finding what you are looking for?
2004 Mazda MPV Logo

524 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Mazda MPV
2000 Mazda MPV

692 Questions

2001 Mazda MPV
2001 Mazda MPV

458 Questions

2003 Mazda MPV
2003 Mazda MPV

413 Questions

2002 Mazda MPV
2002 Mazda MPV

262 Questions

1997 Mazda MPV
1997 Mazda MPV

128 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...