2003 Dodge Dakota Club Cab "blower motor works high level" Questions

blower motor resistor on '04 Dakota 4.7L V8. Second time this has happened, short out? Blower only works on lower levels, not on high. Has the blower motor been replaced as well. If you put one ...

blower motor resistor is bad. When the fan switch is on high it puts a full 12Volts to the blower motor. When you have the switch in any other possition, the voltage is routed through the resistor and

blower fan motor won't run, '97 dakota with A/C 135000 miles. Blower motor started to run only on high speed, then gradually quit. I can get to the wire that provides power to the fan by removing the ...

blower motor. Thank you The control valve could be damaged or you could have a blockage in the heater core. Locate the valve in the engine compartment and watch it while someone inside the truck moves

blower motor not working in any other position then high is the blower motor resistor. The resistor has sends the current through different levels of resistors, to achieve different motor speeds. When

...(4) the blower cuts off completely Check the blower motor resitor. Use a 12v test light at the switch and notice the bulb brightness change as you switch settings.. Probably have a bad blower

...level. Your blower motor resistor, located under the passenger side dash down by the floor next to the blower motor, This will cause the motor to only work on high speed. Gm pt#89019101 around ...

...blower motor and another component box that I think controls the passenger airbag. After removing the plastic cover you'll need to side that passenger airbag module to the right so it pop off its ...

...blower motor work from 1-4 but not on 5th speed why? Question edited for clarity. Question moved to sub category. It has history of problem resistors 2000 chevy impala heater blower only works on - ...

Blower Motor Only Works On High - 2012 Dodge Avenger 2.4 L 4CYL Replaced the blower motor resistor, only to find out that the blower motor resistor connector doesn't have power when I tested it. how ...