2002 Dodge Dakota Club Cab "repair back door latch passenger" Questions

...back to the open position by holding the open handle open and prising the latch outwards if that doesn't work you need to take the door panel off and repair or replace the latch assembles.good ...

repair place but haven't heard back yet. ok open the door and look at the latch now while you are looking at it pull the handle as if you were going to open the door the latch should move if it doesnt

...bottom. You will have to remove screws holding the arm rest and door handles off to remove the panel completely. The panel will snap back into place after you have repaired the linkage for the

...back doors) but not the driver side door. Any idea on the problem? it could be the power door lock motor on that door or the lock motor is not getting the signal from the module.some times the wires ...

back for repair. now door wll not oven with remote or key I have to crawl over and exit via passenge side . it sounds like who ever tried to fix your problem only made it worse there is a plastic clip

...Repair the passenger door such that the warning light goes out. Either adjust the switch outward or adjust the door latch inward. If you cannot get the light go o out that way, you can disable the ...

...back together. I found an online picture of a new one and routed my cables per the photo. It has not given me problems since. Time invested, about 3 hours. Cost was $0. If you buy a new one, cost is ...

...back door open to fix this issue? im sorry to say that u will need to have to door removed...u need to bring this to a body repair shop, they may be able to remove the plastic panel on the inside on ...

...back to locked. I CANNOT get the driver's side door open AT ALL. I tried using the key and power unlock at the same time, etc. No luck. What kind of trouble am I looking at with this?... In a two ...

...back to the open position. Look at a door that's open and you will see what needs to be moved. If it hasn't been damaged by slamming the door on it, that should work. Otherwise you will need to open ...