2002 Dodge Dakota Club Cab "light looks boat turns car" Questions

boat traler lights dim when break is applied Everything works just fine until the tail lights are turned on and the break is applied, at which time my back up lights on the truck come on and the tail ...

...boat. i took the trans out and found the front band was broke and the clutches worn and burnt. so i bout a rebuild kit for it and a shift kit. so i rebuilt the trans followed the direction put it in. ...

...light switch. The parking brake is not engaged. I did hook up my boat trailer for the fir st time this season today and it seems to have started then. Look for blown fuse in the fuse panel. Make sure ...

...light that looks like a boat lights blue then turns red and turns off within 3 mins, what could it be if my memory serves me,the blue light is telling you that the engine is cold.the red tells you ...

...it. when you turn the switch on listen in the fuel tank to see if the fuel pump comes on That light that looked like a boat to you? That was your oil pressure light. Sounds to me you lost oil ...

boat trailer's lights after it came out of the water, the right turn signal lights (both front and rear) stopped working on my 2006 Ford Escape (even after the trailer was then disconnected). The left

no power to trailer running lights I have a boat trailer hooked to a 2006 gmc sierra with no power; suspect a bad fuse. have looked on the side pannel fuse block and all look ok, is there a specific ...

...Turns out it was a turn signal/brake light bulb; the glass bulb had separated from the brass base and shorted out when I put the vehicle in reverse. Vehicle worked fine otherwise. Replaced the bulb, ...

...all systems in the car. on super new cars we have electronic fuses.... less ITC fuses. but is still fused. check fuses and relays then check the dome light switch make sure the dimmer is not turned ...

2003 jeep grand Cherokee overland keeps blowin #20 thing says it for heated seats but they work what doesn't work is the heater display in cab it's got AZC which I replaced still doesn't show temp on ...