2001 Dodge Stratus "timing marks" Questions

...timing marks for a 2002 Dodge Stratus SE; 2.4, 4cyl, with a duel overhead cam. Remove the front cover on your timing belt. This will give you access to the timing mark. The mark is at 12 o'clock, ...

...timing marks are aligned properly according to Haynes diagram and the engine will still not start. It tries to start Changed the timing belt on a 99 dodge stratus 2.4 Liter and it won't start. All ...

...timing marks on each cam gears one is mark on the middle on the tooth and the other one on the side of the tooth 2001 dodge stratus 2.4 4 door? Click on the following direct Free Link. It has the ...

TIMING MARKS I got a use head off a 2004 2.4L and i put it on a 2001 motor but it sounds like my valve timing is off im using the valve cover from the 2001 head and im wondering if maybe the timing ...

...Timing marks for 2005 Dodge Stratus 2.4 DOHC these don't have timing marks, because you can't adjust timing!! timing is computer controlled via the cam sensor and crank sensor!!! if you look closely ...

...timing marks as the timing cannot be adjusted. The timing on the Stratus is computer controlled via the cam and the crank sensors.If you look closely you will see you have a DIS (Distributorless ...

...timing marks on a 2002 Dodge Stratus 3.0 engine? They're behind the timing gears, right side is on the edge of the valve cover and the left side you can seeit if you have covers off. and on the gears ...

align the timing marks and replace the timing belt or chain. This should but you at 0 degrees timed and allow you to be able to adjust the timing as needed to get the motor running smoothly. Good Luck

forgot the timeing belt mark can send you the image of the timing belt marks in an email

How to Align the timing marks after replacing the timing belt 0n 2002 dodge stratus 2.4 dual cam should be a mark for top dead center on the crankshaft and the pulley where the belt goes...line them ...