2001 Dodge Stratus "install car starter standard" Questions

car next to the oil filter. You will need to remove the oil filter to get it out. Disconnect battery first the the wiring for the starter. There are 2 bolts holding the starter in place. Simply remove

...starter. Install starter, install battery terminals (positive first, then negative), start and check for proper operation (no grinding noise or squeling). Im not sure where the lexus starter is ...

install: Position the starter motor to the flywheel housing. Apply locking compound to the bolt threads and install the retaining bolts finger-tight. Tighten the bolts to approximately 25 ft. lbs. (34

...Install the starter in the engine and hand-tighten the retaining bolts. Engage any electrical connections that were removed from the starter. Tighten the retaining bolts and engage any cooler lines, ...

...of socket is needed? They are reverse TORX. Unsure of size, but standard small set will have right size. I removed and installed a new starter in my 1998 Dakota with the original bolts which are an ...

...starter should cost around $150. Labor to install it should be no more than 2 hours. Does your mechanic charge $150/hr? He may be including a diagnostic charge in his estimate. Ask him for a ...

install a starter on a 1997 cadillac deville Remove the fuel injector spider, leaving it connected to the fuel line and hang it out of the way. I used a bent coat hanger to do that. The injectors come

...install a keyless entry remote on my 2006 chevy equinox, that does not already have one on it. Hiya...the factory-installed keyless remote control are installed in most Equinoxes IF SO equipped with ...

...car starter. It was installed a few days ago on my standard honda civic. Sometimes it works fine, but most often when i try to start it with the starter the lights will flash, you hear the car trying ...