2001 Dodge Stratus "cylinder sensor location" Questions

...sensor in cylinder bank # 1 is numbered O2 Sensor 1/1. - The second oxygen sensor in cylinder bank # 1 is numbered O2 Sensor 1/2. - A third oxygen sensor in cylinder bank # 1 would be numbered O2 ...

...side of cylinder head on transmission side .10 mm bolts to take out and put back in. 2002 caravan 3.3l camshat sensor been replaced code still comes back. says bank 1 or single sensor. any

...sensor is mounted on the camshaft housing located on the end of the cylinder head. behind the timing belt cover. Find the cam gear on the engine and usually it is located right next to it. Because it ...

1 is always the engine side where the number 1 cylinder is located. Sensor 1 is the first sensor in the exhaust system, nearest the engine. Sensor 2 is always located farther downstream in the exhaust

...sensor is mounted to the rear of the cylinder head. Remove the negative battery cable. Disconnect the PCV hose and reposition. Disconnect electrical connectors from the camshaft position sensor. ...

...sensor is located. If you have the 2.7L 6 cylinder, it's located in front of engine,or on the right side of the front of the engine just under the top radiator hose. There is a 13mm bolt that has a ...

...to locate the crank sensor? if is a 4 cylinder 2.4 http://en.allexperts.com/q/Dodge-Repair-809/2009/6/2005-Stratus-2-4L.htm how many crankshaft sensor are thereon a 2005 dodge stratus 2.4l 16v ...

sensor is mounted to the rear of the cylinder head. Remove the negative battery cable. Disconnect the PCV hose and reposition Disconnect electrical connectors from the camshaft position sensor. Remove

...sensor is located in the trans bell housing were it bolts to the engine. I think its on the passenger side of the bell housing. it uses the flywheel for locating #1 cylinder for proper firing and it ...

2004 stratus 2.7L 6 cylinder oil sensor location Should be by the oil filter in the block . under the exhust manifold drivers side.