2001 Dodge Grand Caravan "replace rear caliper" Questions

...Caliper over the Rotor. There two (2) types of rear disc brakes on your 2001 Model. But in each case, you have to remove these two (2) guide pin bolts. On each of these different types of rear disc ...

...rear brakes on a 2008 caravan but can not get the e brake cable off so I can remove the caliper The brake cable does not need to be removed to take off the caliper. The only things that need to be ...

...replace them. (2) Hose's are calapsed internally. You check the hoses in the same way, release the bolt and if the calipers DO Release pressure from the brakes then you know it's the hoses. (3) The ...

rear caliper? I replaced the front ones just fine using a ''C'' clamp, but the rear ones seem not to go back is there a trick to it? Older vehicles with caliper parking brakes rotated their pistons in

rear brake pads on my 2008 Dodge Grand Caravan SXT wore out in 5,000 miles. Clearly they are hanging up. Is there something that I should check first? Can I adjust the park brake? Replace the caliper?

...rear drum brakes on the van but its still grabbing the drum i am wondering if the caliper ( i guess it is) may not be working properly i dont know if they can be replaced Your talking about brake ...

rear brake caliper to compress for the new pad on a 2008 dodge grand caravan do you know that rear pistons turn in frount ones compress in auto zone rents a tool for turning the rear pistons in I used

...rear wheels use brake shoes instead of brake pads).  if yes, check your calipers.  completely remove it from your tire and have it cleaned.if the problem still persists, then its time to ...

rear brake pads replace Rent a tool from auto zone to help you compress the rear brake piston. It cannot be compressed with c clamp because the piston must be turned while it is compressed. Autozone ...

rear brakes and rotors on a 2004 Dodge Grand Caravan For Disc Brakes...simply use a 7mm allen wrench to remove the 2 bolts from the inside of the caliper and use a large C-clamp to put pressure on the