2001 Dodge Grand Caravan "fuse dash lights 02" Questions

fuse for dash lights you have a fuse/relay box under the hood. lift the cover off box and look inside cover for correct fuse/relay. there is another fuse/relay panel under the dash to the left side of

replace-instrument-panel-and.html-------Tail lights and dash light fuse keeps blowing? http://technoanswers.blogspot.in/2012/02/tail-lights-and-dash-light-fuse-keeps.html---------This will help.Thanks

...dash lights dome lights or parking lights but headlights turn signals and odometer and warning lights still work That's your fuses check the accessory fuses they're also labeled parking accessory is ...

...dash lights but that is it. In the black fuse box under the hood by the battery check all fuses and use a spare relay to check the relays The fuses I would look at first are#19,20,and 24 if not it ...

...information. If you havent done it already locate your fuse box. Locate all fuses related to your dash board and check them. If you havent done this there is a great possibility you have a blown

center strip on trunk lid is working new bulbs did not fix it Check the brake light fuse first and then the brake light switch. Fuse in the fuse box and the switch works off the brake pedal under dash

...fuse I could find under the dash and in the engine compartment . Also check your manual for hidden fuses . Not much but its a start . When you check the fuses use a test light or swap each one with ...

...dash lights was working fine then this morning nothing worked. also the heated seat light went out sounds like a relay for the circuits and also check the 41 amp fuses in the fuse box ilocated in the ...

...panel on left of dash doesn't specify which fuse that line is on and none of the fuses look bad....is there some in-line fuse that I can't find? no check. all fuses w/a test light on both ...

...abs fuse that is under the seat. Not giving any codes. Put a 15 amp fuse in then the dash went crazy with warnings. Any ideas to shorten my search for issues? What kind of code reader are you using