2000 Dodge Neon "serpentine tensioner" Questions

Is the serpentine belt the same as the tensioner belt? The serpentine belt is held tight by the belt tensioner.

...serpentine belt tool is really needed to do this. you use the tool to move the tensioner to remove the belt. once you remove the belt there is a bolt in the center of the tensioner not on the pulley ...

...This is due to a worn out serpentine belt or worn out tensioner. If the AC works( cools the car) then replace the belt. If this does not cure the problem then replace the belt tensioner as

...serpentine belt. They are easy to re-belt, but the only difficulty is that you will have to re-tension the tensioner. To start out, pull the belt off the tensioner, but don't get your hand too close, ...

...tensioner pulley Make sure you locate the Serpentine Belt Routing Sticker before you proceed. If not make an excellent drawing and take a GOOD Picture. Do NOT try to just remember how it goes back on ...

...tensioner for the serpentine belt on a 98 plymouth neon the pullies dont seem to line up and the belt wants to keep coming off Sounds like either the belts routed wrong or the tensioner isn't ...

...serpentine belt on a 2005 dodge neon? there's not enough room to get the ratchet into the tensioner. there is a tool that will fit I use a bar and push against the tensioner is easier but be careful ...

...tensioner unit and refitting the serpentine belt correctly would have no impact the the starting condition of the engine. If you have removed and refitted other components on the engine to get access ...

...serpentine belt tensioner assembly is mounted on the engine mount plate. None of the fasteners that hold either the pulley or tensioning arm itself are accessible with the mount plate in the vehicle, ...

SERPENTINE BELT TENSIONER?IT IS PART OF FRONT ENGINE MOUNT BRACKET ASSEMBLY..YOU MUST REPLACE FRONT BRACKET/TENSIONER AS A COMPLETE ASSEMBLY..IT'S A BIT OF WORK..YOU HAVE TO REMOVE P/S PUMP,BOTH BELTS