2000 Dodge Caravan "wiper blades hitting" Questions

...wiper arms are not positioned properly, did u have them off? the other problem that will cause this is the transmission that moves the blades is loose or has worn parts. that van takes 27" blades but ...

After replacing the windshield wiper motor on my 1996 dodge caravan the wipers park in the complete opposite position. If I readjust the arm on the motor, the wipers go down not up over the windshield

wiper blades? I just bought two 23 inch blades and put them on my dad's car. However, the passenger side wiper blade hits the edge of the widow and will not move through its wiper motion properly. Are

I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window. Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove: Turn ignition switch to ACCY position

...stops hitting the other wiper blade. What could it be? the fuse? the motor? im not sure bent/broken wiper arms under the base of the windshield..remove the vent cover and service/replace broken

windshield wiper losens and hits outside mirror the bolt losens and after about 2 swipes the wiper blade hits the outside mirror - what part needs replacing? The cone needs to be replaced on the wiper

wiper blades Normally, you press the little lever on the picture below and the wiper blade slide off the arm hook. Sometimes you have to hit the blade downwards a couple of times to make it slide off.

WIPER BLADES HIT HARD ON BOTH SIDES, IS THERE AN ADJUSTMENT OR JUST REPLACE THE WIPER MOTOR I had this same problem. The wiper blades would extend too far and hit the edge of the car, or they wouldn't

...by hand wiper blades changed to not hit each other any more: tech installed lengths backwards :(( If you can move the wiper blades by hand, you probably broke-stripped the gear in the wiper

wiper blades I want to change just the wiper blades on my 1996 Mazda Protege, do I have to detach the wiper arm in order to accomplish that? No removal of the arm is necessary. Typically, there will ...