...idler pulley attaches to. NOTE: THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH A 3.3L OR 3.8L ENGINE. SYMPTOM/CONDITION:Loss of power steering assist and occurs when driving through deep snow or ...
...it slips off I was told to replace the idler pulley but don't know how, can you help? dodge sells a guide washer that bolts on the side of the tightner pulley to prevent the belt from falling
...idler pulley or tensioner pulley; if either one of these it may be easily purchased and replaced. Try like an AutoZone or such, they can probably identify which pulley and get you the proper ...
...replace a/c belt. cannot stretch belt over idler pully. Is special tool needed? If you have a 3.0 engine, the idler pulley is moved to allow the belt to be replaced. There is a bolt to hold it in ...
...attention to the automatic tensioner pulley and arm and the idler pulley's Replace serpentine belt if you haven't done so. Otherwise, one of the pulleys could be bent and wearing the belt
...seperate belt for A/C....there is a set nut on the idler pulley to loosen,and then a spin bolt to move the idler up and down to let belt have some slack...then replace and tigthten.....good ...
...replace it make sure all the pulleys are rotating freelyi.e. air compressor, alternator, tensioner idler & power steering pullies to make sure all of their bearings are running freely. Good luck! ...
...idler pully and bearings, replaced cerpentine belt twice, replaced alternator twice, went back to original alternator. Used belt dressing on original belt, made it 1000x worse. It has 123,000 miles. ...
...replace the tensioner? if so please help. yes you must jack the vehicle up put it on jack stands for safety, and around the power steeirng pump under neath you will see the nut that is holding it you ...
3,122 questions posted
Usually answered in minutes!
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions
1,016 Questions