2000 Dodge Caravan "put belt" Questions

...of pulling the tension off the tensioner using a special tool that you can rent for free at most parts houses. Just keep in mind to draw the belt routing so that you put the belt back on

put to belt on as it shows on the diagram on the fan shroud while rotating the tensioner to loosen position hold pressure on it put the belt over all the pullies then on the tensioner once the belt is

...let tensioner go back. leave wrench on there put on new belt as per diagram or a diag. that you drew the last pulley you put the belt over should be the one that the wrench is on its easier that ...

...put the belt over the pully. tried two belts that were matched with the one that came off. now the tensioner pully bolt has gotten striped and it looks like i have to replace the tensioner. does ...

...put a new unstreached belt on it. While you are at it, check the Idler pulley and all the other ones that are attached to the belt, before it is reinstalled. They should turn smoothly and not bind or ...

belt so I can put in a new alternator. Any help? Their is a belt tensioner on it The bolt in the center is usally a 5/8 or 9/16 use a socket and socket wrench and move the wheel back its spring loaded

...belt put on and all new belts. The sound is got worse and got a new ac compressor put on it. The noise is still there. What could it be? Please not the transmission? Belt idler pully or tensioner ...

...put the belt back on The Tensioner Pulley has a Large Pulley on top with a Bolt in the Middle and a Smaller Pulley at the Bottom that the Belt Rides against. Get a Wratchet and Socket and a Cheater ...

...is loosen the belt tensioner to the belt and put the belt on. Afterwards, tighten the tensioner until there is only slight slack in the belt. Note that you have 2 belts and there are 2

...put the belt back on Tony, If your serpintine belt fell off, and it is not broken, you have a much bigger problem then you think. Before puttin a new belt on, check all pulleys, Power steerin, ...