1999 Dodge Durango "shifting" Questions

Shifting problems 02 Dodge Durango 46re After starting the first shift from 1st to overdrive is perfect. After stopping (as if at a stop sign) it will not shift out of 1st. Sometimes you can get it to

... tried to shift into 4x4 low and it wouldnt go there either, it was making some grinding noise when shifting, didnt have this problem last winter when i got the truck,seems real hard or stuck, ...

durango won't shift into gears by itself my 2001 durango won't shift by itself i can downshift it and it will shift into gear just fine, when i first take off it shifts into both gears then i have to ...

...Shift MalfunctionPossible causes- Low transmission fluid level - Dirty transmission fluid - Faulty shifting solenoid valve - Shifting solenoid valve harness or connectors - Shifting solenoid valve ...

not shifting properly Just all of a sudden The shifting is winding and not shifting smooth i had the tran fluid flushed but didn't help. those trans are known for a 2-3 shift valve going bad. remove ...

...shift solenoids to malfunction. It is also possible that there is low line pressure causing your no-shifting problem. Then there is the question: Are you absolutely certain that you replaced the ...

my truck is acting up transportation not shifting properly some say i need a torque converter when it shift it shifts hard Check to see if the throttle shift position cable that goes to the ...

Shift into gear Truck will not always shift into gear from park. Sometime have to depress break and hold it a few seconds before it will shift hard to move gear shift out of park...2003 dodge durango ...

...into reverse, all other gears work ? is it the transmission? YES SOUNDS LIKE IT IS THE SOLENOID NOT SHIFTING INTO REVERSE OR TRANSMISSION CONTROL MODULE NOT SENDING SIGNAL TO VALVE BODY SOLENOID My ...

2004 durango 4wd shifting by itself They are supposed to. You press the accelerator and as the speed increases, the gearbox shifts itself to keep the engine revs within certain preset parameters. If ...