1999 Dodge Durango "bad cv joint noise" Questions

...is 2wd and 4wd so it has the cv joints also. how do you check the cv joints and u joints to tell if they are bad Making noise when turn wheels left and right.left is right side,right is left

...wheeling makes a whistling noise at the same time. i don,t know what the whistling noise is but it sounds like your cv joints may need to be looked at. the bearings in the cv joint maybe going

knocking noise passenger side wheel Could be tie rod. It could be wheel bad bearings if noise is constant but cv joints they usually make there noise when turning

...CV joint is bad. A squealing scraping noise could be worn out brake pads allowing the small L shaped metal tab to rub on the brake rotor causing the noise too. Look at the pad, the should be very ...

noise whenever I turn the wheel and it seems to be losing power. Any ideas? Could be a bad CV (Constant Velocity) joint. If it binds up as you turn it could slow down the vehicle seeming to lose power

...cv joint going bad and they were never replaced. I have 130,000 miles on 2000 durango. Noise tone also changes when turning to the left. check side carrier bearings in the diff i have rreplace a lot ...

...CV(constant volocity) joints, whichever apply on the vehicle! A quick inspection of the rear suspension at the same time should reveal the source of the unusual noises that you describe. A reputable ...

...CV joints, or your wheel bearing, also have your upper and lower ball joints looked at, durangos are bad for those going out. 4WD could have additional problems, like transfer case, front axle bent, ...

...bad wheel bearing. I can give you further instructions on how to make the repair. Just need to no if its 2 wheel drive or 4 wheel drive. Hi Steve, Have the wheel bearings checked. I would recommend ...

....do cv joints make noise when they are going out? How can I tell if the cv joints are bad????? sounds more like rotors or hub bearings cv joints make a clicking noise while turning when their going ...