1999 Dodge Dakota "nut starter" Questions

Ad

Question about Dodge Dakota

1 Answer

manual starter replacement FIND STARTER REMOVE HOLD ON BOLTS/NUTS REMOVE ELECTRICAL LEADS RE-INSTALL IN REVERSE ORDER,,,MAKING SURE TO PROPERLY SHIM THE STARTER IF KIT COMES WITH SHIMS

Ad

starter from 1995 dodge dakota 5.2 all bolts off, will not disengage from transmission.? removed 2 bolts, 1 nut. barely moves, cannot break from transmission??? Some of these also have a metal bracket

Ad

Question about Dodge Dakota

1 Answer

I have a 98 Dodge Dakota ,got all the bolts and nuts off my starter jsut cant seem to break the stater free. Any help on this matter would be helpful. Thank you May have mounting bolts from both ...

Question about Dodge Dakota

1 Answer

...Change them one at a time, I say this as it is important that the order of insulation washers and nuts are in the correct order when reassembled - using the un-touched plate as a reference helps in ...

nut. Tighten the starter motor solenoid S terminal nut to 3 N.m (27 lb in). Install the starter motor BAT terminal electrical leads and nut. Tighten the starter motor solenoid BAT terminal nut to 10 N

Question about Dodge Dakota

2 Answers

...starter. Tighten the nut to 12 ft. lbs. (16 Nm). Starter transmission close out cover Mounting bolts to the engine block and tighten to 37 ft. lbs. (50 Nm) Reposition the front axle mounting bracket ...

...starter that goes to battery, nut came off easy,put new wire on started tighting nut back on and whole stud is spinning,starter is still on truck 1978 chevy 350 v8 c10, starter stud spins the one on ...

Question about Dodge Dakota

1 Answer

starter nut to 55 inch lbs. (6 Nm). Hold the starter motor in place, then secure in place with the 3 attaching bolts. Tighten the bolts to 40 ft. lbs. (54 Nm). Lower the vehicle. Connect the negative

starter motor S terminal nut and electrical lead. Remove the torque converter cover. Refer to Torque Converter Cover Replacement in Automatic Transaxle - 4T65-E. Remove the starter motor bolts. Remove

Question about Dodge Dakota

1 Answer

...Starter electrical connectors. Torque the positive battery terminal nut to 84 inch lbs. (10 Nm) and the "S" terminal nut to 20 inch lbs. (2 Nm). Lower front air deflector Negative battery cable Lower ...

Not finding what you are looking for?
1999 Dodge Dakota Logo

744 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2001 Dodge Dakota
2001 Dodge Dakota

1,021 Questions

1998 Dodge Dakota
1998 Dodge Dakota

870 Questions

1997 Dodge Dakota
1997 Dodge Dakota

712 Questions

1995 Dodge Dakota
1995 Dodge Dakota

723 Questions

1992 Dodge Dakota
1992 Dodge Dakota

618 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...