1999 Dodge Avenger "lower rear control arm connect" Questions

...rear lower suspension armplacing a wood block in between. Apply a load to the suspension so that the lower suspension arm is plkaced in a horizontal position. Fully tighten the No. 1 rear upper ...

...rear motion of the wheel. BMW calls it the upper, lower support arm. Two arms connect there. one left to right (think typical lower control arm, and this arm) It has a ball joint that connects to the ...

...fuse is okay to. is there something i am missing Their is a link arm that connects from the body to the lower control arm which is what controls the rear ride hight its on the right rear control ...

...rear suspension parts. Notice that the upper control arm and the lower control arm bolt to the trailing arm. (which is what also houses the hub and bearing with the wheel speed sensor.) I hope this ...

...Nm). Shock absorbers to the rear axle. Torque the upper and lower nuts to 63 ft. lbs. (85 Nm). Brake hose bracket to the control arm. Torque the bolt to 33 ft. lbs. (44 Nm). Remove the axle

...rear lower control arm Remove or disconnect the following: Electronic Ride Control (ELC) air tube from the shock Two bolts securing the shock to the control arm Trunk trim to gain access to the shock ...

...lower arm rear strut bushingLower arm into the front sub-frame bracketNew lower arm-to-front subframe nut and bolt. While holding the lower arm horizontal, tighten to 85-97 ft. lbs. (115-132 Nm).Ball ...

...to help my lower control arm be removed safely. I'm not sure that my rear lower control arm is under presser. if the shock isn't connected directly to the control arm no need to do anything with ...

...The sensor bolts to the body and gas a rod connected to the lower control arm on the rear drivers side wheel. Disconnect the wire harness, the rod from the control arm and unbolt it from the

...rear lower control arm/toe adjust arm bushing for where it connects to the crossmember? Do the bushing kits at auto parts stores have this bushing? probably going to have to get the arm from the ...