1999 Dodge Avenger "location engine" Questions

Location and how to replace a water pump. the water pump sould be located at the front end of the engine as it will be driven by a belt ...it should be located low down and to the front of the engine ...

...Location of a/c compressor clutch relay on 2008 dodge avenger The compressor magnetic clutch is located and attached to the front of the AC compressor and the engine drive belt goes over it in engine ...

where is the oil pressure sending unit on a 99 dodge avenger ? engine diagram? on 2.0 and 2.4 engines it is on the passenger side of the engine located rear of engine just before tranny bolts on, up ...

...and list this Avenger as your car. Then you can look under "repair guides" and find ":component locations" for the sensor. They probably also have removal procedures for helping you locate and ...

fuel pump fuse or relay location Fuel pump relay is located in your fuse and relay box under the engine hood by your battery. The relay will be labeled fuel pump. Good luck and keep us posted.

locate 2008 dodge avenger cylinder 1 I need to replace fuel injector on cylinder 1, where is is located? Do you have a diagram whats the engine size.

where is the crankshaft position sensor located on a 2010 dodge avenger 2.4L 2010 dodge avenger 2.4L sxt most are located on the ft lower part of engine by crankshaft with 2 wires going to it

where are the spark plugs located in a 2008 dodge avenger? They screw into the engine block. Open the hood and look for wires going to the block. Pull one wire away from the engine block. Below, is ...

I own a 2012 dodge avenger 2.4L engine and my crankshaft position sensor needs to be replaced. My question is where exactly is that located? My info says rear of engine. Check close to where flywheel ...

where is the knock sensor located on a 2009 dodge avenger 2.4l its located at middle of engine block