Timing Chain System). Lubricate idler shaft and bushings with clean engine oil. Install all chains, crankshaft sprocket, and idler sprocket as an assembly (Installing Idler Gear, Primary and Secondary
timing chain then when done it willnot start i think it fired a few times. MAYBE the cam sensor was defective the place i got the chain set said some people complained theirs did not start. I am going
...a dodge durango 2001 4.7 2 wheel drive What leads you to think your timing chain needs to be replaced? In the 4.7 motor, the timing chain is designed to last the life of the engine, or at least
...timing chain located on 2001 durango supersport its on the front of the engine behind the water pump Push rod V-8 5.2L and 5.9L . It's located behind the water pump in the timing cover housing. ...
...timing chain cover. 3. Remove timing chain and tensioners. 4. Remove the four (4) bolts, timing chain tensioner and oil pump. 5. Position the oil pump on the crankshaft and install two (2) mounting ...
Do the dodge durango 2001 4.7 liter and 5.9 liter have timing chain or timing belt They both have timing CHAINS...
...timing chain set on this 02 Durango with 4.7. Now it is hard starting, jerks under load and sets codes 340 and 344. I didn't touch the cam sensor during the replacement. I know the timing right, when ...
...chain matter I Assume you have a 4.7 liter V8, have you taken the chains or gears off yet, if so, did you line everything up before disassembly and lock the gears with a locking fixture and chock the ...
Question about Dodge Durango
...timing chain on a 2003 Doge Durango,Does it bend valves? if the timing chain brakes the valves could be bent. you could also have damage on your piston or the connecting rods. when the chain brakes ...
timing chain and thermostat does the thermostat housing connect to the timing chain No it does not
893 questions posted
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
886 Questions
1,005 Questions