...water in the distributor. Remove the cap to check if there is any moisture in the cap, if there is you may have a crack in it. Also, check your rotor, make sure the contacts are not corroded and the ...
...water, truck started fine???? Have tried BG44k treatment as well. Check the distributor cap, u can have a very fine crack that allows moisture to enter on damp days and make starting difficult. Look ...
...distributor adjusts the injector timing. Is this true? My engine pings while accelerating and I would like to fix it. I think that the distributors on those are not adjustable , the hold down bolt ...
...sensor maybe, TPS is the cheaper and easier to replace. both are located on the intake manifold. Look under your distributor cap for water or green corrosion on contacts, may just need a tune
...DISTRIBUTOR HAD SIGNS OF HEAVY RUST FROM WATER;I TRIED TO SET THE TIMING TO 10 DEGREES BTC BUT THE TIMING MARK IS ALL OVER THE PLACE;I CHECKED FOR VACUUM LEAKS AND THERE IS NO SIGNS OF ANY;THE ...
water pump on 1994 dodge dakota sport now it will not start, no spark to engine. have checked plugs, coil, distributor cap, rotor, wires and still nothing. even wires feeding the coil do not appear to
...water pump , now the trucks starts runs with lots of gas peddel but wont idle do you have any ideas ,adjustment at the dist or no. I cant think of what might be wrong any help, I would sure be ...
...distributor and the problem still continues. The only thing I can think of is that it's a bad computer module since the problem doesn't happene EVERY time i start the truck, and it goes away once the ...
...distributor pick-up lead wire(s) at wiring harness connectors. Adjust engine timing to specification (refer to Ignition Timing). Basic ignition Timing Adjustment 3.9L Engine Locate and ground out the ...
1,295 questions posted
Usually answered in minutes!
1,021 Questions
712 Questions
723 Questions
618 Questions
593 Questions
