1997 Dodge Intrepid "determine cam sensor bad" Questions

Ad

determine i wasn't getting no spark so i changed the plugs , plug wires , cam and crank position sensors and coil and check the fuses and relays my only option i think is the computer is bad ,

Ad

...Determine if it is getting spark ,have someone Crank Engine over While you are Holding the Spark plug wire 1/4 inch away from coil tower (TERMINAL) do this to all 6 if no spark at any of them ,that ...

Ad

...cam sensor, that's good. The other sensors are the intake valve timing sensor, and a faulty crank shaft sensor. Not sure which one I would check first. You might be able to pull the sensor off and ...

Question about Dodge Intrepid

1 Answer

...determine cam reference. Did you mean crank sensor? Are you coming up with a code for the cam sensor? If so the fix is usually to remove the coils and ignition module from the transmission. Clean the ...

...someone can help me thanks reasons in clude crank sensor faulty, cam sensor faulty, immobilizer not operational broken timing belt/chain faulty ecm run the fault codes to determine which sensor is ...

...determine RPM ranges The crankshaft position sensor consists of a magnet and coil. The voltage signal from the sensor is relayed to the ECM to indicate engine rpm and the position of the crankshaft. ...

Question about Dodge Intrepid

1 Answer

cam sensor-check pressure first to determine if it is good, if so, start with a good tuneup including replacing plugs, the wires and maybe coil packs/distributor cap/rotor, clean the connectors at the

...cam shaft is on TOP of the engine - the sensor's location (standing on the passenger side of the vehicle with the hood open, is on the left side of the engine at approximately the 10 o'clock position ...

cam position sensor. Or the wiring and circuits to all the ignition parts. Often it is the crank sensor (CKP sensor)-The pcm must have this information from the crank sensor to determine spark timing.

...Cam sensors are usually used to tell the PCM that #1 cylinder is at top dead center on compression stroke for fuel injector control ! Camshaft Position (CMP) Sensor The sensor detects magnetic flux ...

Not finding what you are looking for?
1997 Dodge Intrepid Logo

1,180 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...