1997 Dodge Intrepid "change inner tie rod bushings" Questions

Ad

Question about Dodge Intrepid

2 Answers

...inner tie rod bushings have previously been serviced with the tie rod assembly. This bulletin releases the parts, service procedures, and special tool necessary to service just the bushings. ...

Ad

inner tie rod bushings, the small round ones that go inside the tie rod, there is a metal plate with 2 holes that goes onto it and a fastener lock plate. The factory bushings can be hell to install. I

Ad

Question about Dodge Intrepid

1 Answer

...INNER TIE ROD ENDS they are located behind the engine lean over and look for two rods that meet near center of the car and have someone rock the whel back and forth you'll see the play and they are ...

Question about Dodge Intrepid

2 Answers

under a rubber boot both are fairly easy to change inners being more difficult unless you borrow the correct inner tie rod toll (should be able to borrow one from the parts store auto zone more likely

...Inner lower front suspension arm bushings. Tie rod ends, ball joints at bottom of front struts may need grease or replacement. Auto supply houses carry rubber lubricants--don't use motor oil--WD-40 ...

...Inner Tie rod on 1994 Chrysler Town & Country? My shop said I need to replace both inner tie rods and bushings, but would require special tools. What special tools are needed, and what steps to take ...

Question about Dodge Intrepid

3 Answers

...inner ball joints also have bushings that can be changed but its much easier to just change the entire joint. Not fun for a DYIer but can be done. dont forget the most common strut rod(radius rod) ...

...inner and outer tie rods, upper and lower ball joints.. bushing? Just don't want to get hosed when i bring it in.. Thanks in Advance If you feel the "clunking" noises thru the steering wheel, look to ...

inner tie rod ends. Would reccommend an inspection of bushings, tie rods etc. Rotate tires & see if it continues, if not, it's the tire, if still there, have front end checked for loose/worn parts

Question about Dodge Intrepid

1 Answer

i need a diagram or diagrams for how to change my inner tie rods step by step and swaybar bushings I don't know where you live but if the is a store called Ollies the will have a manual foryou

Not finding what you are looking for?
1997 Dodge Intrepid Logo

1,180 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...