1997 Dodge Dakota "access lower water hose" Questions

lower radiator hose clamps. Once water is drained you'll have to remove the ends of the two hoses from radiator. The hoses may be kinda welded in place from rust so you may have to twist the ends back

...lower water hoses. But, it is still blowing cold air even when the care rearches standard operating temperature. Could this be the Evaporator/Heater Core under the dash that now needs to changed out ...

...the lower hose from radiator going to the engine,near the intake manifold, below the housing for the water pump and it cover by the alternator. so need to remove the alternator to have access on

water pump. It is accessed from the bottom of engine by 2 bolts that hold the lower hose on. I have a 1997 subaru outback wagon that overheats with the thermostat in and runs fine with it out, with it

...lower alternator bracket because it blocks access to one of the water pump bolts and move the serpentine belt out of the way. This should give you free access to the six bolts that attach the water ...

...access both heater outlet hoses to install fitting. Thanks - Sleet Power flushing is usually not a good thing as the heater cores can become blocked.I would suggest to remove the lower rad hose and ...

...lower the vehicle. Remove the console if equipped. Unfasten and remove the sound insulators, console extensions and/or steering column filler, as required. Remove the floor or console outlet ductwork ...

access to the lower radiator hose. Step 6 * Remove the drive belts or serpentine belt. Step 7 * Remove any hoses connected to water pump. Step 8 * Unbolt water pump from engine. Remove the water pump.

...access to the lower radiator hose. Step 6 Remove the drive belts or serpentine belt. Step 7 Remove any hoses connected to water pump. Step 8 Unbolt water pump from engine. Remove the water pump. Step ...

...lower battery tray in the housing (depending on model of engine). Even though this is specific for 1998; I believe it's the same for 1996-1999 Taurus's. I have access to illustrations, but only .gif ...