1996 Dodge Intrepid "tie rod end bolt torque" Questions

Ad

...doesnt then its the trans missing "third". Engine cradle mounts or tie rod ends might be worth checking. If it's the tie rod ends, it'll be fairly cheap, but if its the cradle mounts..junk the car, ...

Ad

Question about Dodge Intrepid

1 Answer

...TIE ROD ENDS they are located behind the engine lean over and look for two rods that meet near center of the car and have someone rock the whel back and forth you'll see the play and they are very ...

Ad

...tie rod nuts. 8. using a small sledge hammer hit the mounting point of where the tie rods insert into the hub. not the tie rods them selves 9. next with the ties rods out turn the hub assembly ...

...tie rod ends changing tie rod ends on a friend's Cirrus and we don't have a repair manual. can someone supply the torque values for the tie rod end / steering knuckle bolts? thanks 45 Ft-lbs Tie-rod ...

Question about Dodge Intrepid

1 Answer

...tie rod end nut torque specs. Here are the tie rod end nut torque specs: • Lower Control Arms - (Front and Rear bolt) 129 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs • Upper Control Arms - (Front and Rear ...

Question about Dodge Intrepid

1 Answer

...tie rod end to the rack & pinion. tie rod end torque settings. tie rod end and castllated nuts 35-46 ft lbs. tie rod end jamb nut. 35-46 ft lbs. rack and pinion. power rack and pinion subframe ...

tie rod nut: 37 lb. ft. Outer tie rod ... 1 answer · 1 vote: Coupler clamp bolt to the intermediate shaft: 33 ft. lb. Torque specs for tie rod end castle nuts - JustAnswer https://www.justanswer.com >

THE TIE ROD ENDS.YOU NEED A HAYNES REPAIR MANUAL TO GET THE TORQUE SPECS.YOU PROBABLY NEED WHEEL ALIGNMENT WHENEVER YOU REMOVE TIE ROD ENDS OR UPPER AND LOWER BALL JOINTS IT WILL ALTER WHEEL ALIGNMENT

...pnds Suspension Cradle Plate To-Cradle Attaching Bolt..............123 ft pnds Tie Rod End-To-Steering Knuckle Nut Dakota (2WD) .............65 ft pnds Tie Rod Lock Nut.....................55 ft ...

torque specs. for outer tie rod ends for 2006 dodge ram 1500 quad cab 4x4, 5.7 hemi Tie rod end is 35 ft. lbs. Pinch bolt for the lower ball joint - 105 .I hope this helps you

Not finding what you are looking for?
1996 Dodge Intrepid Logo

671 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...