1996 Dodge Intrepid "chrysler rear break" Questions

rear break job on this car. I have a 2000 Chrysler Grand Voyager, I have repaired the front disk breaks, now I need to repair the rear breaks, can I have some instruction in repairing the rear breaks?

rear disc breaks for a 2007 chrysler I am trying to replace the rear disc breaks on my wifes 2007 chrysler town and country. I did the front with no problem but the rear seem different for some reason

Chrysler pacifica locks up when turning corners changed bearings, rear end, brake capilar break hose on front. I see you didn't mention was CV boots. If it is equipped with that and the boot gets torn

...Country Van. Radio has a 2003 Chrysler Town and Country Van. Radio has a lot of static. Reception is abnormally weak. check antenna connection at rear of radio and window antenna for damage or ...

Chrysler Sebring, The rear lights will not turn off. It is not the break lights because when I press down on the break lights, they just get brighter.. I looked under the hood as well and took out the

...Chrysler Town and Country Touring rear defroster light comes on but no power to rear defroster If there is no power at either connector on the window the first place I would look is the harness that ...

...rear break light (driver side) on pacifica 04 Please tell me how to undo the cover the break light on pacifica o4 in order to chang the break light. if there aren't any screws on the out side, you'll ...

...rear wheel bearing on a 2 wheel drive 2007 Chrysler Pacifica Touring I have removed the brake pads, caliper, rotor, and abs brake pads on the drivers side rear wheel. Then I have taken the four bolts ...

...Chrysler Town & Country LX, 3.3Litre, the tail lights don't work. The break lights work, the turn signal works also. It's not the light bulb. All three of your lights on the rear are ran ...

...Chrysler Sebring has been sitting since March amd now the rear drivers side tire is locked up Rusted brakes. Sometimes, you can hit the wheel/drum with a hammer and get it to break loose. You NEED to ...