1996 Dodge Intrepid "1997 transmission problems" Questions

1997 Dodge Intrepid transmission slipping when warm I have a 1997 Dodge Intrepid 3.5L that has transmission problems after the car warms up. The first time this happened, I'd been slipping around on ...

...1997 chrysler intrepid P0700 codes are Transmission DTC's (Diagnostic Trouble Codes)... The specific codes are Incorrect Gear Ratio codes. This problem could be caused by low transmission fluid, ...

Transmission issues I have a 1997 Dodge intrepid, the check engine light came on and the error code is 733 and 734. The car only goes into 1 then 2nd and when it is to go higher it slips and sounds ...

...1997 dodge intrepid jerks at 65 to 70 milles ,what can that be? and sometimes stall on park. HelloThe engine and transmission in this cars drivetrain are fully electronically controlled by a computer ...

transmission problem transmission wont shift to 3rd gear That transmission is the 42 LE,used to be known as the 606,the sister trans of the minivans' 42 TE,aka 604.Yes,first and foremost,the Check ...

97 dodge intrepid engine light comes on. Code reads tork cellinoid and transmission circuit problem. The car does not jump around like it is having transmission issues. What do I do? The torque ...

OBD2 DTC P0700 &P0733 I have a1997 dodge intrepid . The DTC is P0700 and P0733 .Has anyone received these codes and had success clearing these codes. And what did you do to solve this problem. Help ...

...problems.html---------Car freeze overnight and started overheating while driving?http://technoanswers.blogspot.com/2012/01/car-freeze-overnight-and-started.html-----------Engine Overheats and heater ...

...1997 dodge intrepid is leaking transmission fluid real bad so i try to keep it as full as i can... today it tried to get hot and over heat so when i got home i checked all the fluids and used my code ...

limp in mode transmission wont shift to 3rd gear. yes the check engine is on how do I delete or fix the "limp in" mode? Your shift control computer is getting a bad sensor value. So either a shift ...