1996 Dodge Dakota "put clutch" Questions

...Put back together, but still no clutch. Then replaced slave cylinder and master cylinder. Then bled for 30 minutes until steady stream of fluid but still no change! So why do i still have no clutch? ...

...clutch against something so it is standing upright just as it is when it's bolted to the water pump until you are ready to put it back on. Hope this helps you out a bit! it may require a special tool ...

...put the truck into first gear, and eased off of the clutch, and the truck lurched forward as if I had dumped the clutch. Thinking I had blown the clutch, I shifted into reverse and the truck DID ...

put a clutch in wont start i have a 1998 dodge dakota truck I put a clutch in and now it wont start It turns over but wont start.It's like a wire is unplugged.I checked and looked and wiggled all ...

...on all vehicles. Then remove the pressure plate,as I assume you know Then the flywheel,have it machined & balanced & put it all back with new clutch disc,pressure plate & throw out

...put a new clutch in it. it will only go into gear when the truck aint started. if the truck is in 4 wheel high it will go into gear but wont turn shaft or wheels. Hi, Just a thought, is the clutch ...

...put a new clutch in it and every thang went good but went to ingag the clutch and it wont go in to gear in lees the truck is not streted when u put the truck in gear then step on the cluch it trys to ...

clutch pedal pumping. Get your assistant to put their foot on the pedal and push on it. Put a clear tube(approx 5mm dia.) over the bleed nipple, use a spanner to open the bleed nipple. When the clutch

...1999 dodge dakota We can not get the clutch to bled . After we put a slave cylender on it. Please take a look at my suggestion here: ...

I have a clutch fan on the water pump how do you remove the clutch from the pump? Need a 36 mm wrench or 1 7/16" Put a pry bar across pulley bolts to keep pump from turning, while you unscrew fan