Question about Mercury Cars & Trucks
...connector. Remove the 3 RH temperature blend door actuator screws. Remove the RH temperature blend door actuator. 2006 2010 Ford Explorer NO Heat Passenger Temp Actuator Replacement same as ...
Question about Dodge Caravan
...blend door actuator located on a 2010 Mercury milan Deep inside the dash behind the glove box. That should be very similar to a Ford Fusion, here is an online forum with how one member did thiers and ...
Question about Dodge Caravan
2010 Buick Enclave drivers side heater and air work fine.passenger side will only blow cold ,replaced actuator on passenger side still blowing cold only Does the air temperature Blend door that the ...
...replace a blend air door for a 2010 Dodge Ram You may have to pull the dash or glove box to get at it. Your best bet is to go to www.alldata.com for DIYer and get a subscription for your vehicle. ...
Question about Dodge Caravan
2010 Flex with dual zone heat/AC has 3 blend door actuator motors. There is one directly behind the glove box, one more is to the left of the cabin filter on the right side of the main climate control
2010 Kia Forte Koup Blend door replacement assistance... I have a 2010 Kia Forte Koup. When I hit the recirculation button (A/C or heat) there is a loud clicking noise coming from behind/underneath ...
Question about Dodge Caravan
...To replace both parts you will need to completely remove the dash from the car to access the blend door. You don't have to remove the dash to replace blend door actuator... ...
Question about Dodge Caravan
...& air blend actuator on my 2010 Chevy equinox and it was working like it should and then it stopped heating again. Is there something that can cause these to fail ? Did you calibrate the actuator
Question about Dodge Caravan
...2010 dodge caliber once i remove section of dash to replace the door blend actuator is it visible or do i have to remove anything else?. Ronald mcgough. I don't have a manual for your model, but did ...
Question about Dodge Cars & Trucks
Location of the blend door actuator on my 2010 dodge caliber. Inside the HVAC system air ducting behind the dash assembly, the dash must be removed to replace/repair it.
443 questions posted
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions