1994 Dodge Intrepid "rear" Questions

...Ground Black/Light Blue Illumination Orange Dimmer Pink Antenna Trigger Orange/Red Antenna Right Rear Front Speakers 4" Doors Left Front (+) Dark Green Left Front (-) Brown/Red Right Front (+) ...

Rear Brakes Passenger side rear brakes keep burning up. Wheel cylinder pistons do not seem to be retracting. Drivers side rear works fine. Put new shoes, wheel cylinder cups, seals and new springs did

Rear wheels lock down A year ago I had to cut the emercency brake cabke under the dash. The pedal would not disengage. Now the rear wheel (driver side ) keeps locking up. What is a fix? You will need ...

the front of my 97-dodge interpid sits highrh than the rear... I just brought my car had the tires rotated & now the front sit's higher than the rear by about a inch ,are the rear rim's bigger ...

replace rear struts on a 96 dodge intrepid I suggest QuickStruts (r). Unless you have a spring compressor, they're the most user friendly. They come in the box as a ready to go, one piece, assembly. ...

rear brakes grinding. intrepid If you have rear disc brakes it is probably very low pads grinding on the rotor.If you have rear drums it is probably very low shoes.Now if you here it when your foot is

...is the primary circuit that is the front brake section and the one farthest from the back of the rear of the master cylinder is the secondary which will go to the rear of the brakes. Now this is ...

Both rear brake lights do not work,left and right, but the one in the tailgate above the rear window does work and the fuse is good also. I also checked the bulbs, they work also. What could be the ...

...Front Speaker Positive Wire (+): Violet Right Front Speaker Negative Wire (-): Dark Blue/Red Left Rear Speaker Positive Wire (+): Brown/Yellow Left Rear Speaker Negative Wire (-): Brown/Light Blue ...

my rear door lock makes a weird sound when power lock in gauges sounds like the actuator on the rear lock unit is on its way out if it doesnt come seperate from the door lock itself you will have to ...