1994 Dodge Caravan "small road" Questions

dodge caravan metal banging sound in the front undercarriage when driving over small pot holes or uneven road strutts bad sounds like a bad control arm bushing,ball joint or sub frame bushing worn out

...small bumps and road undulations. Big bumps may not cause it. When car is torqued, such as turning from street into elevated entrance. Mechanic replaced struts and stabilizer bar. No help. You may ...

...small bump in the road, what could possibly be wrong? I had the same problem. It was the front sway bar bushings. I took it to the dealer when it was still under warrantee. The replaced everything ...

...small vacuum on the gas tank. It took about 4 hours of trouble shooting to verify that it was bad. There was some power steering fluid on it from the leaking rack plus some road grime. Seems to me ...

...road) May 2008. Van sat in driveway approx. 1 yr. We just replaced the cv joint, but now the van wont move because the back wheels have locked up. We've spent too much time, and tried many things--no ...

...small leak so replaced it and I though everything was good to go but recently notice my surge tank was empty and radiator coolant was low so I looked around and notice intake manifold gasket had wet ...

small bumps and uneven road. I have found that not only do the bushings wear but the metal of the bar as well. So replacement of the bushings does not always solve the clunk or the play. You will need

...road. I had it checked out and they couldn't find out what was causing it to die. Finally a neighbor who is a mechanic checked it out and found that the speed censor on the transmission was going out ...

...penetrating lubricant, and pliers.  First, if you cannot open the door at all: There is a small plastic disc plugging a hole just above the latch on the inside. Pop out that disk, and use a ...

...road grime and brake dust the tools you need are likely a 3/8, 1/2, or 7/16 open end box end wrench, or just a small cresent, just make sure its tight arount the box part of the fitting so you dont ...