1993 Dodge Intrepid "fixed side head light power" Questions

...head light test for power at each socket,test the ground at each socket to do this,clamp your test light to the POSITIVE side of the battery touch the other end to the ground side of the light socket ...

...SIDE OF THE TWO FUSES MARKED INSTRUMENTS AND TAIL LIGHT, BUT THE FUSE IN THEM IS GOOD,I CHANGED THE HEAD LIGHT SWITCH,WHICH DID NOT FIX THEM,PLEASE HELP THANKS, BOB the only way to get power at the ...

...side lights; ECU + B - (electric control unit battery) - electric control unit powered by battery; DOME - interior lighting; ECU + IG - (electric control unit ignition) - electric control unit for ...

...side rear bumper now. But after that happened several electronics died in the car and I don't know where to start. The dash board lights and gauges stopped working. Only the check engine light, ...

...side headlamp is not working I have replaced the bulb but this did not fix the problem Check fuse #28 10 amp in the driver side fuse box under the dash this is power leg to the drivers head light

...side if they don't it maybe you head light switch . If you see the maker light on there There is a led cluster light that is the main light for you tail light check to see if you have power going to ...

...head lights, no tail lights, no dash lights and no courtesy lights. Where do I start? On most GM cars they put clear rubber/plastic inline fuses on the main power wires going to the cabin. Your short ...

...head light module and the headlight switch but that did not fix the problem please help . i had the same problem, open the hood look by the headlights, just to the side of them you will see knobs. ...

...head lights,left front & rear marker lights No heater.cigar lighter.I checked all light relays in under the hood fuse links box.All under the dash fuses are ok.Flashers on both sides work. Hazard ...

...side parking lights/dash lights don't come on. 10 amp fuse just keeps blowing. Checked bulbs and replaced head light switch. you shouldn't have replaced the switch... it was probably good from the ...