1993 Dodge Dynasty "replaced power booster truck wont" Questions

Ad

...push down to brake so i pretty much have no working brakes. your power brake booster needs replaced ,it work off engine vacuum and when the seal inside leak there is no power assist for the ...

Ad

...tried replacing caliper booster wheel cylinder still the same resort check vacuum at the power brake booster -also test booster internal diaphragm may be damaged -if both good check and test abs ...

Ad

...power brake booster. removing the booster and replacing with a simple direct master usually wont even bolt up easily, but the pedal height and positioning for connection usually is not compatible ...

...power booster on a 1981 corvette Just got corvette and it needs the booster replaced you will have to remove the master cyl no need to dissconnect the lines and dissconnect the vacuume line and from ...

replaced pads and shoes as van would not stop now it still wont stop a noise is coming from the master cylynder in motor Either the power booster has failed or the master is bad...If the noise sounds ...

replaced the master cylinder if you hear a loudish hissing noise when you hit the brakes you may need a new power booster as well my old 85 chevy did the same was booster not master cylinder hope this

Question about Dodge Dynasty

2 Answers

replaced plugs and now wont stay running and the brake pedal is tight very hard to push Hello donmicca, On the back side closest to the fire wall the brake booster vacuum line runs from the intake ...

Question about Dodge Dynasty

4 Answers

power booster behind the master cylinder leaking. (actually sucking in vacuum) which if excessive could possibly turn the check engine light on (may show up on scan as an O2 sensor or "lean condition"

...power brake booster has gone bad, wont hold vacum the seal has gone bad, thats why you hear air and brake pedal is hard, booster sit under hood on drivers side fire wall, master cylinder bolts up to ...

replaced power booster on my 97 silverado. now the shifter lever wont move . what is wrong most likley you damaged the brake switch that is on the pedal or you plugged it in wrong or its unplugged. Do

Not finding what you are looking for?
1993 Dodge Dynasty Logo

196 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...