1991 Dodge Dynasty "engine" Questions

Fuel pressure drops immediately to zero when engine is shut off. 1991 Dodge Dynasty LE 3.3 engine. Fuel pressure reads 43 at the rail while engine is running, but drops instantly to zero when ignition

can't get fire to the coil pack or injecters what can I do? you have to see all the fuses for the engine if all is ok you have to put the scaner and read the actual values engine speed it should gives

my engine light comes on and my car will not stay cranked I have a 1992 Dodge Dynasty and the engine light comes on . It will crank, but when I get off the gas it cuts off. you need to take it to your

...relay are not shorting and also check out the Start relay circuit. You should be showing a check-engine light. If nothing, make sure the computer is receiving power when the key is on. Check the ...

where is the water pump If the engine is 3.0 l it is timing belt driven and under the timing cover . If it is 3.3 or 3.8 it is rf lower engine outside belt driven ( this is muce easier to replace.

1991 dodge dynasty belt diagram You didn't mention engine size, so here are the two V6 engines... 3.0L 3.3L

Just need to know on the engine which order do they go starting up front 3 then 3 in the back Thanks for choosing FixYa and welcome. What kind of make, model, year, and engine size?

On hot days, when vehicle is stopped for traffic light and engine idles, the engine dies--normally after 4 or 5 minues, it starts and runs with no problems until engine idles agains, the it stops on ...

loosing power at cruising speed I own a 1991 Dodge Dynasty with the 3.3 litre engine. Car starts fine and runs fine until I get out on the freeway. Sometimes within about 15 minutes or up to a half ...

...controlled by vacuum actuators and probably defaults to defrost when it doesn't get vacuum from the engine. Trace the plastic vacuum line from the engine intake manifold to the heater control knob ...