...3 liter flex fuel random cylinder misfire along with 1 2 5 6 cylinder misfires. scan tools are unable to communicate with computer but check engine light will come on. I have changed fuel pump, fuel ...
Question about Dodge Grand Caravan
...3-4 times in row, won't turn over, but 10 mins later starts and stays running. What is the problem? If the fuel pump and injectors check out OK, then this is likely an intermittent throttle position ...
...fuel pump prime itself for about 2-3 seconds. if it primes you'll want to check if you are getting fuel to the injectors. On the fuel rail that the injectors are connected to, you should find a ...
...fuel filter 2. Leaking injector 3. The gas cap (tank gas input) is clogged - Gas tank does need some air 4. Pressure check you gas line - should be in the 20s and hold steady for hours. Could be slow ...
Question about Dodge Grand Caravan
...3.8L have a fuel pressure valve to test the fuel pressure? The manual says it does have a valve but it also says the 3.0L does not. It possible the manual mixed up the 3.8 with 3.0 or did I just ...
...3-5 times for the Car to successfuly start..I don't know what the problem is really. maybe the tempature in the morning? try the spark plugs or wires and the dist. cap and rotor (cap and rotor might ...
Question about Dodge Grand Caravan
...3 check compression for that cylinder then check for vacuum leaks there as well. then you should check the fuel injector for operation. if this has coil per plug it maybe a coil that is bad. P0303 ...
Question about Dodge Grand Caravan
...3 misfire. I changed plugs..now wires. I checked fuel injectors and pressure they are good, but I see an arc of spark coming from coil pack screw going to #1 spark plug wire .I capped of screw but ...
...fuel. 3. Fuel pressure must be reduced when manifold vacuum is high. Vacuum pulls fuel out of the injector causing it to deliver too much fuel if the pressure remains high. Manifold vacuum is used to ...
fuel injectors. Within days the check engine light comes back on and I'm still getting a misfire in piston 3, WHY? Could something be wrong with the computer? When your cylinder head was removed . Did
48 questions posted
Usually answered in minutes!
1,073 Questions
901 Questions
905 Questions
722 Questions
711 Questions