When stopped, there is a motion in the back much as if the car has been bumped. Any ideas? Check ur "U" bolts, connect axle to springs, check spring bushings and sway and stabalizer bar bushings
Question about Buick Park Avenue
1995 Ford Taurus stabilizer bars cause rear end of car to ''sway''. Dealer says 3 of the 4 stabilizer bars need to be replaced ($1200.00). If these are worn is there a cheaper way to do this myself ...
front end shakes at 50mph, possible stabalizer bar, front end shakes at 50mph ,dealer replaced stabaler bar last year, problem back. just wonder if did relace or just adjusted bar' Do a replacement. ...
how do u install the stabalizer link on a 1992 olds 88 Locate the old link, it is one bolt that holds isolators and washers around the stabalizer bar to keep it from moving up and down, and eliminates
Question about Cars & Trucks
does front stablizer bar have to be removed to replace bushings f Does front stablizer bar have to be removed to replace bushings for 1994 chevy c1500 pickup? yeah i removed my stabalizer bar bushing ...
stabalizer bar installation If you would like a useful solution for repairing your vehicle, it would be much better if you were to describe the problem you are having and what information about ...
Question about Buick Park Avenue
...not find anything wrong with it what could it be? i checked muffler and heat shields, along with stabalizing bars and sway bars and conectors even looked for defects with the strut but found ...
stabilzer bar on 98 olds intrigue how do get the stabalizer bar off from the front end of a 1998 oldsmobile intrigue without taking the front end apart? just lift it up in the air lower the engine ...
What does a stabalizer bar look like on a 96 dodge caravan About 1" bar runs from side to side behind/near steering rack to each side, held on with "U" shaped brackets and rubber bushings. Rear runs ...
Question about Buick Park Avenue
How to change shaft stabalizer bar on 2002 buick rendezvous The stabilizer bard rarely need replaced. There 2 brackets holding the bar in place. They both have a bushing that goes bad from time to ...
263 questions posted
Usually answered in minutes!
690 Questions
585 Questions
537 Questions
482 Questions
474 Questions