1999 Buick LeSabre "cylinder" Questions

92 buick le saber---changing plug wires... rear cylinders are even, front are odd... from left (passenger side) to right(drv. side) what order is correct?? PLEASE help. am poor single father and ...

jump it off and it cranked but shut down how can i bypass the security system Replace the ign. lock cylinder. Put old chip key in new cylinder. Plug it in to the connector at bottom of steering column

...on the front of the engine ( radiator side) are from the passenger to the drivers side 1-3-5. The cylinders on the back side of th engine are from passenger to the drivers side 2-4-6. Put the worse ...

how much would it be to by pass the vat system on a 97 buick lasabre ? A new ign lock cylinder is about $41.00 . Find wire at bottom of steering column just behind lower cover. Unplug wire and plug ...

...My friend said that there was brake fluid leaking from the car and that I might need a master cylinder seal. If it isn't the seal what else could it be? if you can see a good amount of wet

...coil pack or packs. If that doesn't work you'll need to perform a compression test on all of the cylinders and see if you have a cylinder that isn't building up proper compression. If my memory ...

which cyl is cyl #1 on a 2000 3.8 lesabre the rear cylinders are 2 4 6 and the front cylinders are 1 3 5..so the #1 cylinder is the front one on the passengers side.

95 Buick LeSabre, brakes will only hold for a week then have to re bleed the system.has new master cylinder,Any ideas Check all your brake lines especially those going to the bleeder valve where you ...

need the diagram to put spark plug wires on in correct order for 2001 park ave 3.8 litre cylinders 2-4-6 are on the back side of the engine. 2 is on the passenger side, 4 is in the middle, and 6 is on

can you please explain what code p0304 cylinder 4 missfire means and how can I fix that thanks. p0304 means the computer has detected that cylinder 4 is misfiring. the most common cause of a misfire ...