...ignition key...? I don't know what's going on...? If you lock your doors with your remote or the power locks you need to unlock them with the remote or the alarm will go off. to reset the alarm you ...
...what accurs is back windows and the passenger front window stop working usually the child lock oput for the windows is set.. pull out window switch and check for ignition power with key on let me ...
...key wont turn,brake wont depress,steering wheel locked up ...checked fuses they seem not burnt out...please help i have no product knowledge of this american vehicle but does it have a cable like a ...
...antitheft mode starter will not get power how do you bypass this Lock then unlock the drivers door with the key, then Put the ignition switch in the on position for 25 minutes do not try to start
...key (resistor value) in the ignition lock, you will have to disconect the battery for 3 min. Make sure you have the right key. Very important! Make sure the climate control is off before ...
key is. i need to brake the ignition lock and wire it directly to a kill swich and push button start. thank you , jerry easier way to go about this would be just remove the lock cylinder would be alot
...in the ignition key, it says in the manual to wait 3 minutes then try again. it should work unless the contacts in the switch are worn or the resister in the key is worn enough not to make ...
...locked the car you used the keyless remote, and you also used to to UNLOCK the car too...right? assuming you did, your car should have started fine. Now, when the security system is engaged the key ...
Question about Buick Park Avenue
...power, and the chugging that occured when going up hill. I have a 1991 Park Avenue with 190k miles. Fixing the catalytic converter helped, but the real problem was in the ignition control module. It ...
895 questions posted
Usually answered in minutes!
690 Questions
537 Questions
482 Questions
474 Questions
426 Questions