1998 Buick LeSabre "replacing high pressure hose" Questions

Ad

...will need to be replaced since they run under high pressure. If one can not be found new have to old one replaced with a new hose done at a hydralic hose repair shop. Many are found in the yellow ...

Ad

...high pressure switch on a/c of a 2003 buick lesabre find the ac compressor, follow the hose going to the rear, when you find two wires that's it Don't touch it unless the system's been evacuated, ...

Ad

Question about Buick LeSabre

1 Answer

...high pressure in fuel tank due to blockage in EVAP purge hoses or overfilled tank Loose/damaged FTP sensor connector Loss of ground to the sensor Possible Solutions: Using an scan tool access FTP ...

Question about Buick LeSabre

1 Answer

...high as you can get it **DO NOT FORGET TO CHUCK THE REAR WHEELS*** 2. Begin by removing the battery cable, air filter hose and air filter box, the front wheels and disconnecting all the sensors from ...

high oil level, then run engine long enough to expel air from system. Sticking, Warped or Eccentric Valves, Worn Guides. Sticking valves will cause irregular engine operation or missing on a low speed

Question about Buick LeSabre

1 Answer

...replacing the pump requires you to support the engine and remove the mount. 1980's models have all the engine mounts at the bottom, and 2000 and later models have the front mount bolted to the cast ...

...high pressure line for power stearing high pressure hose leaking can it be repaired how much pressure is in line Their are two (2) lines coming out of the back side of the pump, one of them will have ...

...high pressure is built into the feeder line (relieve valve stuck?? hoses or drive-rack blocked??) YOU CANT USE A REGULAR FUEL LINE ON POWER STEERING AS A HIGH PRESSURE HOSE.BECAUSE POWER STEERING ...

replacing mine. It is much easier if you do these steps: 1. Remove the serpentine belt. 2. Remove the nuts holding the main fuse box over the battery. 3. Remove the reinforcing bar over the battery. 4

Question about Buick LeSabre

1 Answer

...High pressure and low pressure. High pressure hoses have a high pressure fitting on each end. Low pressure hoses often have a pressure fitting on one end, and nothing more than a hose clamp (band ...

Not finding what you are looking for?
1998 Buick LeSabre Logo

1,447 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1992 Buick LeSabre
1992 Buick LeSabre

779 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...