1998 Buick Century "install thermostat" Questions

Ad

Question about Buick Century

1 Answer

...and then carefully remove the inlet. The thermostat is inside. If the gasket was not damaged when opened, you can simply install a new thermostat and do the reverse procedure previously

Ad

...thermostat housing and install the housing. Lightly lubricate the bolts with clean engine oil. Torque to 18-20 ft. lbs. (23-27 Nm). If removed, attach the radiator hose to the thermostat housing. ...

Ad

Question about Buick Century

3 Answers

...install your thermostat. This should not even be possible if you have the correct thermostat. I do know some come with a rubber ring that will have a **** inside of it. That is meant to have the ...

...install the new thermostat; put RTV sealant on the gasket faces. Install the new thermostat as was the old ONE, don't miss install it. Follow right Installation procedures & NOT outdated one??? ...

...old thermostat and remove the old gasket with a razor blade.. install your new thermostat and gasket and away you go!! richie what would make my Buick over heat replaceing a thermostat 98 buick ...

...Install the thermostat (spring towards engine) and bolt the water outlet into place while the R.T.V. sealer is still wet. Tighten the bolts 17-21 ft. lbs. (23-28 Nm) on all but the 2.2L engine. Other ...

...housing remove housing and the thermostat note how thermostat is in replace the same way, install in reverse order and fill with coolant. Let run till bubbles no longer come out then top off

Question about Buick Century

2 Answers

...INSTALL THERMOSTAT WITH SPRING TOWARD THE ENGINE TORQUE THERMOSTAT OUTLET HOUSING BOLTS 89 INCH LBS.IF STILL LEAKS OUTLET HOUSING COULD HAVE CRACK IN IT CAUSING LEAKING. i just need to no where the ...

Question about Buick Century

1 Answer

install thermostat 1. Follow the upper radiator hose from the radiator to the engine block and there you should see a neck where the hose is connected to the engine block. 2. Take the hose off by ...

Question about Buick Century

1 Answer

...Clean gasket material off housing and block. Put on new gasket, install thermostat. Replace housing, etc. You may have to disconnect/remove other parts to get to the housing botls, maybe

Not finding what you are looking for?
1998 Buick Century Logo

1,241 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...