...Remove right side tire and using long extension and wobble socket you can get to it through the right fenderwell. Some GM cars have 2 bolts you have to get this way, one is right above the other one. ...
remove the 3 bolts off the torque converter? replacing the transmission come up from behind the engine and undo one bolt turn the flex plate by hand and undo the second bolt turn it again and undo the
...BATTERY CABLE.REMOVE THE RADIATOR AIR BAFFLE ASSEMBLY.REMOVE THE ELECTRICAL CONNECTIONS.REMOVE TORQUE CONVERTER COVER.THEN REMOVE STARTER.PUT EVERYTHING BACK VISA VERSA.TORQUE STARTER BOLTS 35 FT
...cannot separate with pry bar I can get a little gap on the starter hole side. but it just springs back. remove the transmission torque converter ,,that seems like your hold up from what you ...
Question about Cars & Trucks
...torque converter on a D21 1990 pickup Flexplate to torque converter bolts NISSAN D21 OLD. ENGINE TOLD. 2.4l OR 3 liter. (USA car?) THE SERVICE MANUAL COVERS ALL THAT. OLD OLD PU staged always cross ...
...remove access panel for torque converter bolts located at lower front of bell housing, after access plate removal rotate torque converter to the point where you can not only unscrew converter bolts ...
Question about Cars & Trucks
...and the torque converter is bolted to it with either 3 or 4 bolts the procedure is to remove the cover , undo those bolts and pull the transmission including the converter back at least 12 ...
...Remove or disconnect the following: Negative battery cable Radiator lower air deflector Torque converter cover Electrical connections from the starter Starter motor To Install: Install or connect the ...
Question about Cars & Trucks
...torque converter to drive plate bolts? We're switching engines on my car and I don't want to mess anything up when putting the engine and transmission back together. there is no set way to ...
Remove or disconnect the following: Lower front air deflector Starter electrical connectors Torque converter cover Starter bolts and shims Starter Fig. 1: View of the starter - 3.5L engine To install:
504 questions posted
Usually answered in minutes!
224 Questions
182 Questions
155 Questions
143 Questions
87 Questions
