1997 Buick Park Avenue "replace driver side ac actuator" Questions

...air and on the driver side hot air how can i fix this U need to replace the air temperature control blend door actuator motor, this requires removing the dash to access the motor for the blend

...driver's side of the 1999 Buick PA, but was blowing HOT air out of the right two vents. This car ha dual zone settings. The passenger side was set to cold also. Never seen this before. Later it ...

...driver side vents blow only hot ac only works on pasanger side There is a door actuator motor that is not working for that side,the dash will have to be removed,and pulled back into the seats to ...

side is cold enough, that the AC should not need to be recharged anymore. If the blend door is the problem, how do you get at it? Is the actuator/motor located on the passenger side to the left of the

driver's side. Any ideas? Temperature blend door actuator . There are electric motors behind the instrument panel that control air flow direction. GM calls it a Temperature Valve Actuator Replacement

driver side 2000 impala cold air passager side and warm air driver side ac is on there is an actuator for the drivers side heater that opens the temp door. this motor actuator needs changing. so it is

...driver's side & cold on passenger side. AC works fine. Heater valve coils appear to be working as designed. Are there control or sensor components that can cause this? I do know , hard to explain , ...

DRIVER SIDE COLD ON PASSENGER OR COLD ON DRIVER SIDE - YouTube This is common problem in dual ac.there are separate hot and cold air temperature blend doors.it's not as bad as neither side working.for

...driver side. Why did you replace the passenger side, was it blowing hot too when AC was on? your vehicle has dual climate control and it appears to be a known issue blowing hot on the driver side. As ...

AC to work normal on passenger side, but blow hot air from drivers side. Are the doors operated by vacuum or by electronics? The temperature control doors are controlled with electric actuators. Often