water pump needs replacing looking for the layout on the 92 lasebre engine, would make things a whole lot easier Loosen the bolts on the water pump pulley, then remove the belt, then remove the the 4 ...
...water pump clutch I'm replacing the water pump in my 2000 LeSabre. I have the fan off and I have removed 8 screws...now what is the trick to get the BIG bolt off on the clutch plate? You need ...
...water pump 3800 6 cylinder Replacing the water pump is very easy. I have done it a few times. I have owned a total of four full-size GM cars; a 1992 Oldsmobile Eighty-Eight, a 1989 Buick LeSabre, a ...
...Water Pump problem water pump on m 97 lesabre is busted and i need instructions on how to remove and replace it THE POWER STEERING PUMP PULLEY --- ARRGGH...Not a problem. The power steering pump is ...
...Water Pump Bolts Near Engine Mount. How do I remove the Water Pump from a 1992 Buick LeSabre? I have been able to remove or loosen all but two bolts which are recessed and hard to get at. . The bolts ...
...pump replance what are the symthoms of fuel filter going bad There are some that think fuel filters today are so large they most never go bad. I tend to disagree and have found many very clogged up. ...
water) pump. This is what actually moves the coolant around the engine and through the radiator so it can be cooled and take the heat away from the engine. If this is not working, you will not get any
water pump What tools to use Just a standard metric socket set a 10mm wrench, flat screwdriver( to place between two of the bolt heads to hold pump pulley in place so you can loosen bolts) just loosen
Question about Buick LeSabre
water pump on a 1997 Buick LaSabre with a/c? Are there any special tool needed? There is a bolt on the bottom of the pump that I can't get to and there is one in front of the p/s that I can't get out.
2,358 questions posted
Usually answered in minutes!
1,731 Questions
1,084 Questions
904 Questions
897 Questions
779 Questions