1996 Buick Century "wheel sensor" Questions

Ad

...wheel sensor can be tested by raising the front wheels off the ground and spinning the wheel if you have a muitly meter hooked to the connecter at the wheel in question .If it generates .5 volts Dc ...

Ad

Question about Buick Century

1 Answer

...wheel sensor It is a sensor that can detect one or more wheels traveling at a different speed. This way it can tell if a wheel is about to lock up. It will release and put pressure on the brake ...

Ad

Question about Buick Century

2 Answers

...wheel bearing (or sensor if its replaceable separately, you didn't give a year) if it checks out OK then move to the wiring to the ABS computer, then the computer itself. These are abs codes before ...

Question about Buick Century

1 Answer

...wheel drive the the MAP sensor is located on passenger side by the throttle body it's a little black box with three wires and a vaccum line connected to it. If it's front wheel drive, then the map ...

Question about Buick Century

1 Answer

...of each wheel .clean with carb cleaner .with the wheel jacked up spray down each sensor hole turning the hub as you do so as you must clean the teeth .on the shaft .it is dirt you have to

Question about Buick Century

1 Answer

...on and them go off with a restart. now it stays on. Each wheel has a sensor that communicates with the computer to monitor the rotation of the wheels. These sensors can go bad and require

...wheel speed sensors. As the wheels turn back and forth they tend to fatigue the harness and cause an intermittent brake in the wire , this makes the computer think that you have lost traction and ...

wheel speed sensor short or open. Have already replaced hub/sensor assembly, EBCM, and cut out old/spliced in redesigned harness as per tsb. Code continues to set intermittantly, please help. Odd part

Question about Buick Century

1 Answer

...the rear end inner and outer wheel barrings on a 95 buick century wagon? Take the wheel off. Remove wheel speed sensor wires at the back of bearing assembly. Remove the torx bolts to remove

...wheel sensor. They only way to find out which wheel sensor that is causing your trouble is to take it to a qualified shop that has the right electronics for an abs system. This wheel sensor controls ...

Not finding what you are looking for?
1996 Buick Century Logo

608 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...